Showing posts with label bosch. Show all posts
Showing posts with label bosch. Show all posts
Friday, March 3, 2017
MPPS V18 software read Audi A3 Bosch ME7 1 K Line successfully
MPPS V18 software read Audi A3 Bosch ME7 1 K Line successfully
It’s verified that MPPS V18 eu clone can work on Audi A3 ecu Bosch ME7.1 without any issue.
MPPS V18 device in the test:
Diyobd2 engineers tested MPPS hardware v1.08.21.
Only this version with PCB design below can work with mpps v18 software.
Source: http://www.diyobd2.fr/wholesale/mpps-v18-main-tricore-multiboot-avec-breakout-tricore-cable.html
MPPS v18 software:
It’s version 18.12.3.8
Test model:
Audi A3 1.8L
The engineers test the MPPS V18 on Audi A3 for ECU id reading.
1) Plug MPPS V18 clone to the OBD port under the dashboard on the Audi A3 car and connect the other end of it to a laptop running MPPS V18 software.
2) Start the laptop, the car and then the MPPS V18 application software.
3) Select the language to use on the upper right corner. Here it’s English. It’s a multilingual version, covers more than ten languages.
4) Select the car make and car model. Here I select Audi and then A3.
5) Select the cars ECU type: “1.8L Bosch ME7.1 K-Line”.
6) Hit “ECU ID (F1)” at the bottom right on the MPPS interface.
MPPS V18 reading AUDI A3 Bosch ME7.1 K-Line success!
Available link for download
Tuesday, January 24, 2017
How to read write Bosch PSG16 flash with MPPS V18 clone
How to read write Bosch PSG16 flash with MPPS V18 clone
Here are questions and answers about MPPS V18 eu clone, form PSG16 owners and experienced Mpps v18 users. Wish this helps!
Q: Can it read and immo from pump or just flash(maps)?
A: mpps reads/writes only flash (only part with maps)
Q: Mpps v18 is possible read flash Psg16?Read for Obd flash & immo ?
A: eeprom only Carprog or FVDI.
Q: Anyone test mpps v18 eu clone with PSG16 read/write flash?
A: Works fine. Real direct to the pump,write for obd
i made also on 2-3 egr off, working fine...
Q: if its a virtual read or real , and if its a partial read/write or full? and work on CAN and K-line ? or just CAN?
A: Read real for CAN
Cheksum calculated for program
Cheksum calculated for program
Q: It’s Read and Write via OBD? or have to connect direct to the pump?
A: Read direct to the pump and write obd or direct to the pump.
Q: Is there pinout how to connect to the pump and is it read pin or just flash?
A: the pinout
Q: Does it work in psg16 saab? And the same pump but with different software
A: Yes, work in saab fine!And also, MPPS V18reads writes on plug astra, zafira (k-line) tested.
Q: Any more success with mpps v18 on psg16?
A:?Opel Astra 2.0 16V CDTI Bosch PSG16 CAN Read: Yes Write: Yes Checksum:Yes
Opel Zafira 2.0 16V CDTI Bosch PSG16 CAN Read: Yes Write: Yes Checksum:Yes
Opel Zafira 2.2 16V CDTI Bosch PSG16 CAN Read: Yes Write: Yes Checksum:Yes
Vauxhall Astra2.0 16V CDTI Bosch PSG16 CAN Read: Yes Write: Yes Checksum:Yes
Vauxhall Zafira 2.0 16V CDTI Bosch PSG16 CAN Read: Yes Write: Yes Checksum:Yes
Vauxhall Zafira 2.2 16V CDTI Bosch PSG16 CAN Read: Yes Write: Yes Checksum:Yes
So, users has successfully tested clone MPPS V18.12.3.8 on the Bosch PSG16 ECU, reads/writes only flash... read direct to the pump and write obd or direct to the pump.
Good luck and enjoy mpps!
Available link for download
Subscribe to:
Posts (Atom)