SEMEURBAK

This is guide for using OBDSTAR X300M Odometer Correction Tool to change mileage for Audi Q5 2010. The operation is easy and clear as follows.

The original mileage: 22850 KM

Step1. Connect OBDSTAR X300M to car and start the device. Choose “Vehicle”? “AUDI/VW/SKODA/SEAT”? “Audi”? “Q5”? “2008-2012”? “Mileage Adjustment”.

Step2. Now OBDSTAR X300M will show the exact original kilometer. Press the Enter button to continue.

Input new mileage kilometer you want to change, in this car it is “105312”. Press the Enter button to confirm.

It will start to adjust odometer, usually 10-25 minutes to wait.

After that adjustment complete.

Things done! OBDSTAR X300M Odometer Adjustment Tool successfully change Audi Q7 mileage from 22850 KM to 105312 KM!

It’s verified that MPPS V18 eu clone can work on Audi A3 ecu Bosch ME7.1 without any issue.

MPPS V18 device in the test:

Diyobd2 engineers tested MPPS hardware v1.08.21.

Only this version with PCB design below can work with mpps v18 software.

Source: http://www.diyobd2.fr/wholesale/mpps-v18-main-tricore-multiboot-avec-breakout-tricore-cable.html

MPPS v18 software:

It’s version 18.12.3.8

Test model:

Audi A3 1.8L

The engineers test the MPPS V18 on Audi A3 for ECU id reading.

1) Plug MPPS V18 clone to the OBD port under the dashboard on the Audi A3 car and connect the other end of it to a laptop running MPPS V18 software.

2) Start the laptop, the car and then the MPPS V18 application software.

3) Select the language to use on the upper right corner. Here it’s English. It’s a multilingual version, covers more than ten languages.

4) Select the car make and car model. Here I select Audi and then A3.

5) Select the cars ECU type: “1.8L Bosch ME7.1 K-Line”.

6) Hit “ECU ID (F1)” at the bottom right on the MPPS interface.

Have used Digiprog 3 v4.94 for nearly one year around. Work well and fast with the digi. It’s my right-hand woman in the Audi repair shop.

Some test results i have taken notes:

Audi a1 works (depending on software number)

Audi a2 obd ok

Audi a3 repair 999999 in dash with digiprog

Audi a3 2001 vdo obd ok

Audi A3 2010 by OBD OK

Audi A3 2002 obd2 is ok

Audi a4 2001-2005-obd ok

Audi a4 8e b6 2004 obd ok, use 2 minutes

Audi a4 2007 obd dash read ok write ok/ecu make-it via touran edc16 write 2 times to change.

Audi a4 2009 3.0quattro obd ok

Audi a4 2005-2009 obd ok

Audi A4 2010 Work

Audi a4 2012 obd ok and fast
Audi a5 2013 obd ok
Audi a5-2010-obd ok 15 min

Audi a6 c5 obd

Audi A6 2002 ok after some effort.
Audi a5 2009 3.2L obd ok 30min

Audi A6, 2009 work OBD, 4-5 minute.

Audi A6 2010 dash via obd (takes a while to find code but ok)

Audi A8 4.2 tdi 2008 Dash OBD OK 2min

Audi S3 2002 obd2 is ok
Audi TT 2002 obd2 n8 is ok

Audi Q3 2010 obd ok 15 min

Audi Q5 2.0tdi 2010 by obd ...20-30min
Audi Q7 2012 20 sec by obd work ok

Audi Q7 2007 OBD work

Audi q7 2008 obd ok

Audi tt hc 12 plug ok

...

(sorry, that’s not the full Audi car list.. Sometimes busy to death and forgot it, but i will add more if possible :D)

And some photos of Audi A4 Avant 2.0tdi 2006 with DP3 clone obd ok. Enjoy!

Here is a tutorial for using KTAG K-TAG ECU Programming Tool Master to read VAG Audi A3 ECU EDC17C46 on bench. Steps are as follows:

Step1. Open Audi A3 ECU EDC17C46 unit: first heat the edge to soften glue inside then open it carefully not to damage the circuit board.

Step2. Open KATG K-TAG software. Connect the cable 14P600KT02 to ECU connector according to following pin out diagram:

Step3. Take a wire, cut the wire cover at the middle. Solder its two ends to the two pins (red) as follow:

Step4. Back to K-TAG software, choose plug-in “P199” and click “OK”.

Click “Read” and wait it 100% complete. And then save the bin file. Now KTAG ECU Programming Tool read VAG Audi A3 ECU EDC17C46 successfully!

Here are some tips for OBDSTAR VAG PRO”license error” when change mileages, reset service and steer on Audi.

2007 gti,  2008 seat leon, 2008 audi a4? 2012 audi q5 fails to do steering reset, mileage correction, service reset. And the device displays “license error” then the dashboard is freezed.

Solutions and suggestion from obdstar customer service:

Try to update VAG PRO Audi to the latest version via the official website: www.obdstar.com.

OBDSTAR scanner update tips

Then the issue should be solved.

Here are all testable Audi models for vag pro.

Read security code
        17 Dashboard
            Auto   
            A4 RB8 2006-2007
            Manual
        25 Immobiliser
            Auto
            Manual
        01 Engine
            Auto
            Manual
    Program keys
        17 Dashboard
        25 Immobiliser
    Program remote
        35 Central lock(KWP1281)
        46 Central comfort module(KWP1281)

Vag pro for Audi Odometer Mileage v30.72:    Audi
        A3
            2003-2006
            2007-
        A4
            RB4 2002-2005
            RB8 2006-2007
        A4L
            2008-2012
            2013-
        A5
            2008-2012
            2013-
        A6
            1998-2004
        A6L
            2004-2008
            2009-
        A8L
            2003-2006
        Q5
            2008-2012
            2013-
        Q7
            2006-2008
            2009-
        R8
            R8 2007-
        S5
            2008-2012
            2013-
        S8
            2007-
        TT
            TT 2007-

Obdstar vag pro for audi RESETSRS:    Audi
        4B0959655G
            Erase collision record
            Erase the ECU internal fault
        4B0959655R
            Erase collision record
            Erase the ECU internal fault

Vag pro obdstar for audi STEERRESET V30.01:    Audi
        Break electronic system
        Steering wheel electronic system
        Steering electronic system