SEMEURBAK

This blog is going to make you clear: Why you need a CAN filter when deal with MB BMW Renault car mileage adjustment? How to choose a right CAN filter? And CAN filter manual and wiring diagram are also available here!

1.Car mileage data are stored in both dashboard and EZS, and you can change a new KM on Mercedes car dashboard but KM data in EZS will still keep old.

2.CAN filter can block/ filter old mileage data from EZS module. So EZS and instrument data will not synchronize. And original dealer workshop scanners like MB STAR or Xentry will show same mileage in EZS as in car instrument cluster.

3.Besides CAN filter doesn’t interrupt any vehicle electronic system, so there is no DTC fault code or error after install.

That’s why you need a CAN filter for MB BMW Renault!

There are several kinds of CAN filters which are recommended and free shipping.

1.Super CAN Filter for Renault Laguna III, Megane III, Scenic III/BMW CAS4 and FEM/ MB W212 W221 W164 W166 W204 ($22)

http://www.diyobd2.fr/wholesale/super-can-filter-for-renault-bmw-mb.html

2.MB CAN Filter 3 in 1 for W222/W217/W205 (New Mercedes Benz S / C series) ($38.8)

http://www.diyobd2.fr/wholesale/mb-can-filter-3-in-1-for-w222-217-205.html

3.MB CAN Filter 5 in 1 for W221 W204 W212 W166 and X166 ($38.5)

http://www.diyobd2.fr/wholesale/mb-can-filter-5-in-1-for-w221-w202-w212-w166-and-x166.html

4.MB CAN Filter 10 in 1 for W221 W204 W207 W212 W166 X166 W218 W172 W246 W176 ($36.99)

5.Yanhua MB CAN Filter 18 in 1 ($38.8)

http://www.diyobd2.fr/wholesale/yanhua-mb-can-filter-18-in-1.html

Support Mercedes models:

S (W222) C (W205) V (W447)

S (W221) C (W204) E (W212)

E (W207) A (W176) G (W46)3

ML (W166) SL (R231) GL (X166)

B (W246) CLS (W218) SLK (R172)

SLS (W197) CLA (W117) GLK (X204)

This blog will guide you how to use OPCOM to active filter for Opel Insignia 2011.

First, you need OPCOM interface:

OK, now you can start:

Step1. Open VAUX-COM 120309a software. Choose “Diagnostics”? “2011 (B)” ? “Insignia” ? “Engine” ? “A 20 DTH”

Step2. Choose “Measuring Blocks” function

Then choose “Exhaust Aftertreatment Data” and you can see many measured values as follows:

Step3. Back to choose “Programming” then “Regeneration D. Particulate Filter” then “Start Activation” and that’s all steps. In this way you can use OP-COM to active filter for Opel Insignia!