SEMEURBAK

I’ve been trying to get Consult 3 plus V46.11.00 to work with my NEXIQ usb link. Nexiq supports J2534 so i figured I would give it a shot. I have a CF-19 Tough book which contains all me software for diagnostic. The CF-19 runs in deep freeze all the time to prevent any issues. So I typically test software I acquire on my desktop first. Long story short I installed it on my Desktop edited the .ini file and got it to show connection to my nexiq. (Haven’t tested on a car because my desktop is in my living room). So I thought I was good even wrote a short tutorial to keep with my backups of software. I then installed on the CF-19. Edited the .ini. Expected to the the USB connection with the blue dot.... Nothing. I installed both exactly the same. Im running identical versions Windows 7. There is quite a bit of software on my CF-19 I dont if its interfering or not. Does anyone have any ideas. To be so close to it working but not able to test is frustrating. Below I will put my short tutorial to show the steps I took and also maybe it will help others. (This is not my work just the steps I found on here)

J2534 PassThru for Nissan Consult 3 plus

1. Install Niassan Consult III+.

2. Make sure the driver for your PassThru is installed.

3. Open regedit.exe

4. Navigate to HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node > PassThruSupport.04.04

5. From there choose your device. (For example I have a Nexiq Usb-link, so I choose either " NEXIQ Technologies - USB-Link" or "NEXIQ Technologies - USB-Link Bluetooth". I choose to use standard USB-Link)

6. Once youve click on your device look in the right column for "Name"

7.Right click on "Name" and choose "Modify..."

8. A window will appear copy exactly what it say in the "Value data:" box. (For example mine is "NEXIQ USB-Link over USB")

9.Close regedit.

10. Naviagte to "C:CONSULT-III_plusSystemApplicationApplicationDataCommonSetting"

11. Open "DiagnosticTool.ini"

12. Copy & Paste the text below under "access_mode=1" in DiagnosticTool.ini
with the exeption of putting the text you copied from regedit in place of "!!!!YOUR_DEVICE_NAME!!!!":

[device]
vi_device_name=!!!!YOUR_DEVICE_NAME!!!!

[mode]
debug_mode=TRUE
debug_mode_vehicle_battery=TRUE"

13. Done

Ps. special thanks to the one share tips above at http://mhhauto.com/

This blog is a guide for using UPA USB Serial Programmer to read Peugeot 307 BSI Motorola MC68HC912. It just costs 3 minutes and easy to do!

Step1. Open UPA USB programmer V1.3 software. It will show you the MC68HC912 wiring diagram.

Connect UPA USB programmer with laptop. Then you need to solder and connect cables according to the wiring diagram to connect the other end with Motorola MC68HC912 MCU.

Step2. Choose “MC68HC912DG128” from left side drop down menu. And select “EEPROM” option at right side.

Click “Read” and it will start read MCU.

And then UPA USB programmer read MC68HC912 MCU successfully! Now you can see the Peugeot 307 bsi dump.