SEMEURBAK: I 2013 Multidi g Access Communication Error after Update

Friday, January 27, 2017

I-2013 mutidiag access failed to communication after update. And here are professional suggestion by diyobd2.fr. Hopefully, it helps someone.

Mise a jour de linterface de communication

(Updating the communication interface)

Erreur pendant le telechargement de la vci. Verifiez que la vci est connectree a l’outil et au vehicule.

(Error while downloading vci. Verify that the vci is connected to the tool and the vehicle.)

Suggestion from professional technicians work for diyobd2.fr:
1- try to re-install windows system (Windows XP or Win7 32bitbetter)

2- disconnect network connection

3- re-install Multidiag access i-2013 according to the video guide below:

http://youtu.be/vc8aQxOMP_A

4- then it should work fine.

If the Multidiag i-2013 still fails to connection, please send your unit back to the vendor for repair.

To update Multi-diag software needs technique and luck:

You need to buy the corresponding chip to change it on the board, before software update.

V2011 update chip for Multi-Di@g J2534 Interface

This is the PIC12F629 chip for Multi-diag j2534 to update your tool from 2010 to 2011.

V2013.1 update chip for Multi-Di@g J2534 Interface

With this update chip, you can update your Multi-Diag j2534 interface from V2010 V2011 to V2013.1.

Tutorial: How to update Multi-Diag J2534 interface to v2013 v2011

Note: when use i-2013 multidi@g to test the car, it’s a must to setup the USB driver first.

Original - from diyobd2.fr obd2 francais:
I-2013 Multidi@g Access Communication Error after Update

Available link for download