SEMEURBAK

This blog will introduce you a new Peugeot Citroen scan tool: PSA-COM Bluetooth diagnostic and programming interface. It can fully replace Lexia 3 PP2000 Diagbox! Below is more PSA-COM information for you:

PSACOM main unit:

PSACOM 16-pin connector:

PSACOM indicators at the other side:

PSA-COM is a dealer level diagnostic and programming interface for Peugeot/Citroen vehicles.

It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS etc. and also can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.

PSA-COM functions as follows:

Automatic ECU recognition

Automatic vehicle scan

ECU Identification: – finds all the available ECUs in the car by pressing the single button.

Bluetooth – wireless connectivity to your Windows laptop or tablet

Fault code (DTC) reading

 Fault code clearing, with the ability to store DTC vehicle history forever

Freeze frame reading

Measured values / live data recording, fully dynamic with graphing of up to 6 data streams at a time, recording and other manipulations

Diagnostic protocol printing

Actuator tests, test components via direct ECU access

Key programming

Service reset

DPF (Diesel Particulate Filter) regeneration

EGR (Exhaust Gas Recirculation) self-test

Airbag programming

Injector programming

Power Steering calibration

ECU replacement

Car configurations

Yes, PSA-COM supports many languages as below:

Windows 2000/XP/Vista/7/8/8.1/10 or Linux and Mac OS/X (using Wine emulation)

ISO15765, PSA2000, Bosch KW71 and PSA2

PSA-COM interface contains 8x ISO9141 K-Line, 1x ISO9141 L-Line, CAN-BUS and analog measurement circuits.

If you have lost the master key and badly need a new key programmed, you will be quoted euro 50-euro 200 from one place to another. It is a bit expensive. What device can you program a Peugeot new key?

Diyobd2.fr here gives some suggestions:

1) SBB V33 auto key programmer (French available)

The clone Silica SBB V33 key programmer will program my Peugeot 307 HDI spare key via immobilizer. But you need a pin code from BSI dump. There is a step-by-step document instruction:
http://diyobd2pro.blogspot.com/2015/03/how-to-program-peugeot-307-can-2009-key.html
http://www.slideshare.net/spobd2/program-peugeot-307-can-2009-key-with-french-sbb-v33-key-programmer
If you have other car models, check the vehicle list first,
http://www.diyobd2.fr/upload/pro/listado-de-sbb-vehicles-atendibles-2010.pdf

2) Lexia-3 cable Peugeot Planet 2000/Diagbox

For Peugeot, it is better to use lexia 3 PP2000 to erase and add new key.
You need a programmer to read dump from BSI to find the pin code/confidential code in case you don’t have it and use PP2000 or diagbox to program the key.

Here is a detail instruction:
http://blog.udn.com/diyobd2fr/20529250

3) Zed Bull transponder clone key programmer

Zed Bull and Silica SBB V33 complete each other. With zedbull you can find pin code from dump and programming transponder directly from immo dump so in many cases you don’t need the car and SBB is connected to OBD port and you need pin to program transponder on the car.

In conclusion:
Both Lexia 3 interface and SBB key programmer requires a pin code to access. But Zed Bull key pro does not need. Lexia3 XS Evolution will not program all Peugeot key, so better choose SBB v33 because it cheap at twice the price than Zed Bull.

Prompt:
Peugeot 307 OBD diagnostic connector location

On the right of steering wheel is a big plastic scew, turn that (will not come out) pull on cubby hole, whole bit of trim comes of and its there.