SEMEURBAK

Remove Bluetooth device in Windows 10 - Thats what we gonna see in this post...

Works on Windows 10

Creators Update, Windows 10 Anniversary Update, and other editions of Windows like Windows 10

earlier builds like Aug 2015 and Nov 2015 builds.

Music wont play over my Bluetooth Speaker- how to fix it, thats what we gonna see in this post.

Today, when i visited my friends home he showed his new Bluetooth speaker and asked me some

suggestions why the music doesnt play over his bluetooth speaker. I Checked the usual procedures

like Whether sound drivers are installed, yes it was installed, i then checked device manager and

found out whether the device has drivers that support Windows 10, yes it was updated. But still the

problem persists later i changed an basic option that i forgot to do ???? and it fixed the problem.

So, if you are searching for something that will fix your problem of music not playing on bluetooth 

device connected to Windows 10, then here is your guide.

Do you need any software ?

No, but you need appropriate drivers.. if you had connected your PC to internet, then you dont need

to worry because when connected to internet windows will automatically download the required

update thourgh windows update.

OK, then how to do it..?

Just follow the below steps..

Music wont play over my bluetooth Speaker or headset - Fix

1) As said earlier, your PC should have the latest device drivers..

if you suspect on how to confirm, check this article [Link 1] [Link 2]..

2) Check those two links, which may be helpful

After checking, make sure you had paired your bluetooth

[See : How to pair Bluetooth device in Windows 10]

3) Connect your Bluetooth device to Windows 10 PC

[See : How to connect Bluetooth device in Windows 10]

4) After, pairing, connecting its time to play some music..

5) Open your music player and play any music.

Now, on your taskbar on the far right you will see the Speaker icon..

i) Right click the speaker icon, it will display many options like Playback devices, Recording

devices, Volume,Sounds, Troubleshoot Audio Problems.



ii ) Click on Playback devices

iii) It will display the sound window.

iv ) Now, you can find devices under "Select playback device below to modify its settings"

v) There, if you had paired and connected your Bluetooth speaker or headset you will the see the

device there..

vi ) Select your device,if not

vii ) Right click the bluetooth device and click connect

viii) Now, again select your bluetooth speaker and select set it as default

You can see the audio playing on Bluetooth speaker from now on..

Thats it...

Hope it is helpful.

Thats the end of this post..

Click to read all basic tutorials..

This blog will introduce you a new Peugeot Citroen scan tool: PSA-COM Bluetooth diagnostic and programming interface. It can fully replace Lexia 3 PP2000 Diagbox! Below is more PSA-COM information for you:

PSACOM main unit:

PSACOM 16-pin connector:

PSACOM indicators at the other side:

PSA-COM is a dealer level diagnostic and programming interface for Peugeot/Citroen vehicles.

It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS etc. and also can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.

PSA-COM functions as follows:

Automatic ECU recognition

Automatic vehicle scan

ECU Identification: – finds all the available ECUs in the car by pressing the single button.

Bluetooth – wireless connectivity to your Windows laptop or tablet

Fault code (DTC) reading

 Fault code clearing, with the ability to store DTC vehicle history forever

Freeze frame reading

Measured values / live data recording, fully dynamic with graphing of up to 6 data streams at a time, recording and other manipulations

Diagnostic protocol printing

Actuator tests, test components via direct ECU access

Key programming

Service reset

DPF (Diesel Particulate Filter) regeneration

EGR (Exhaust Gas Recirculation) self-test

Airbag programming

Injector programming

Power Steering calibration

ECU replacement

Car configurations

Yes, PSA-COM supports many languages as below:

Windows 2000/XP/Vista/7/8/8.1/10 or Linux and Mac OS/X (using Wine emulation)

ISO15765, PSA2000, Bosch KW71 and PSA2

PSA-COM interface contains 8x ISO9141 K-Line, 1x ISO9141 L-Line, CAN-BUS and analog measurement circuits.

This blog will show you how to install and use new arrival Renault-COM Bluetooth Diagnostic Interface software. The installation guide and steps will list as below:

About this new tool, you can check

Step1. Download Net Framework 4.0.exe or 4.0 above in your laptop in advance.

Disable ALL available networks before install or use Renault-COM software.

Step2. Open “My Computer” then CD-ROM “ASP_REN (E:)”, copy all files to desktop.

Install Net Framework: double click Net Framework software icon on desktop to start the Setup.

Step3. First check the box “I have read and accept…” then click “Install”.

Wait a while and Net Framework installation complete, click “Finish”.

Step4. Open “SuperScan_10-02-13”, select language as English then click “OK”.

Click “Install” and wait a while, you will see the install wizard as below. Click “Next”? “I accept…”? “Next” ? “Next” ? “Install” ? “Finish”.

Now you install Renault-COM software successfully! Delete Net Framework and “SuperScan_10-02-13” from desktop.

Click “Add” you will see “Add Bluetooth device wizard”, check the box “My device is set up and ready to be found” then click “Next”.

Choose the option “Use the passkey…” input “1234” then click “Next”.

Add Bluetooth device wizard complete, click “Finish”.

Open “SuperScan Manager”, choose the language you use then click “Continue”, “OK”.

You need to fulfill personal information part. Just enter “1” in name blank and you can continue.

Click “Auto Detect” then “Test Connection” to test everything is OK to go on.

You should enter two activation codes, one for EOBD-OBDII, one for RENAULT. You can check them at the Read Me file.

After that you can use Renault-COM to diagnose car!

Click “Diagnose”? “New Vehicle” ? “Renault” ? “Create”, now you start to use Renault-COM Bluetooth Diagnostic and programming Interface!