SEMEURBAK

Whether you are looking for how to pin app to taskbar or how to solve the problem cannot pin to

taskbar,(which means pin to taskbar is not working) here is an guide on how to do in windows 10.

In our last post, i had explained how to pin an app to start menu [Check it here], in this post i like to

show how to pin apps to taskbar in Windows 10.

Of course, there are many ways available to pin an app to taskbar or pin an app to desktop in

windows 10. But, some of it are complicated so i like to show only the couple of Ways you can use it.

How to Pin an App to taskbar in Windows 10 

It’s a VVDI2 VAG manual of CS, PIN, MAC reading. Manually read cs, pin and mac from vag 4th immobilizer system ECU and automatically from vag 5th immobilizer system ECU

You can select autodetect engine control unit existing to get PIN/CS or type in known

PIN/CS manually

Component security bytes. It has 12 bytes for UDS 4th immobilizer cluster. Move your mouse to this area, you will get balloon show 7 bytes CS in ECU show original 6 byes CS is: C2 D3 45 7E 68 0E). You can’t find 7th byte CS from UDS 4th immobilizer cluster, it don’t have 7th byte, it have another 6 bytes CS part 2

CAN 4th immobilizer cluster (CDC32xx, A3/TT/R8) will have 7 bytes at this value. That

is the original 7 bytes CS

ECU must have same 6 bytes CS with balloon show CS bytes. If they are not same,

you car can’t start

login code, it can use login to ECU or other module which support login immobilizer PIN. You can learn dealer key with CAN protocol cluster ECU has same PIN with this value. If not same, car will not start. So, for CAN protocol cluster, you can learn key with PIN read from ECU

Synchronization codes between ECU and immobilizer system, usually have 4 bytes. The first 2 bytes is immobilizer synchronization code, the last 2 bytes is ECU synchronization code. MAC value in the picture above is “B188708F”, “B188” is immobilizer synchronization code, “798F” is ECU synchronization code. Generally, the synchronization code for ECU or immobilizer system is a fixed value. If you install new ECU, MAC value in immobilizer will change last 2 bytes to new ECU synchronization code; if you install new immobilizer, MAC value in ECU will change first 2 bytes to new immobilizer synchronization code. 

Normally, MAC value must be same between ECU and immobilizer. If there are not same, ECU and immobilizer system will have same DTC error like this: Engine control unit is not authorized. You can fix this error by “Adapt Unit->select ECU->Read->Write”, it willsynchronize MAC automatically between ECU and immobilizer system

Autodetect PIN/CS:

Read PIN and CS from engine control unit or immobilizer system automatically. After success read PIN and CS, you just need input key count to learn key

NOTE: PIN, CS, MAC function only can be authorized for free for those with Xhorse iKeycutter Condor XC-MINI key cutting machine.

Good news for sharing! It is tested that OBDSTAR F108 PSA Pin Code Reader easily read 2013 Peugeot Partner pin code in less than 2 minutes! Check below to know more info:

First turn car ignition on then plug OBDSTAR F108 into car OBD connector. F108 will be powered up.

Choose “Function”? “Immobilizer” ? “Peugeot/ Citroen V31.09”

Choose “Peugeot” ? “Read security code” then press the ENT button to continue.

And OBDSTAR F108 will start read pin code for you!

Wait about 1 minute and you will soon get the pin code for this 2013 Peugeot Partner as “KJER”!

http://www.diyobd2.fr/wholesale/obdstar-f108-psa-pin-code-reading-and-key-programming-tool.html